Close
Driver de LED 400W, 24-48 V, boitier métallique, IP67 : Série GP-CVM400P Agrandir l'image

Driver de LED 400W, 24-48 V, boitier métallique, IP67 : Série GP-CVM400P | GLACIAL POWER

Boîtier entièrement isolé avec un indice de protection IP67.

Plus de détails

Téléchargement

Description

Caractéristiques :

  • Gamme d'entrée AC universelle 90 ~ 264Vac.
  • Mode tension constante.
  • Conception PFC active.
  • Protections : OVP / OCP / SCP / OTP.
  • Rendement élevé jusqu'à 93%
  • Boîtier entièrement isolé avec un indice de protection IP67.
  • Refroidissement par convection d'air libre. (Boîtier métallique)
  • Consommation d'énergie à vide<0,5W à 230Vac.
  • Convient aux bandes de LED et aux applications d'enseignes mobiles.

Références et spécifications :

Model No. GP‐CVM400P‐24V GP‐CVM400P‐36V GP‐CVM400P‐48V
Output DC Voltage 24V 36V 48V
Rated Current 0‐16.7A 0‐11.1A 0‐8.3A
Rated Power 400.8W 399.6W 398.4W
Ripple & Noise (Max.)
Note.2
350mV 400mV 500mV
Efficiency at 230Vac (Typ.) 93% 93% 93%
Voltage Tolerance Note.3 ± 5% ± 5% ± 5%
Set up time (Max.) 0.5s / 230Vac, 1s / 115Vac, at full load.
Input Rated Voltage 100 ~ 240Vac
Voltage Range 90 ~ 264Vac
Frequency Range 47 Hz ~ 63 Hz
AC Current (Max.) 5A at 115Vac / 2.5A at 230Vac
Power Factor >0.98 at 115Vac / >0.94 at 230Vac at full load. PF≧0.9 at 70% load
Total Harmonic Distortion THD < 20% at 230Vac, full load Note 4.
Inrush Current (Max.) Cold Start 120A (Td=1020us measured at 50% Ipeak) at 230VAC
Max. Number of PSUs on Circuit Breaker B type : 1 unit (25A),
C type : 1 unit (16A) / 2 units (25A),
D type : 3 units (16A) / 4 units (25A) at 230VAC
Leakage Current <1mA / 240Vac
Protections Over Current 105~180% rated current.
Type: Auto recover after fault condition disappeared.
Short Circuit Type: Hiccup mode & recovers after fault condition disappeared.
Over Voltage 26~38V 38~50V 50~65V
Type: Hiccup mode (Auto recovers after fault condition disappeared).
Over Temperature Tcase : 100°C ± 10°C
Type: Shutdown mode(re‐power on to recover).
Environment Operation Temp. ‐30°C ~50°C (Refer to output load derating curve)
Operation Humidity 20% ~ 90% RH non‐condensing.
Storage Temp. ‐40 ~ +80°C
Storage Humidity 10% ~ 90% RH
Vibration 10~500 Hz, 2G 10 min./1 cycle, period for 60 min. each along X, Y, Z axes.
Safety& EMC Safety Standards EN61347‐1, EN61347‐2‐13, independent, IP67 Approved.
Withstand Voltage I/P‐O/P: 3.75KVac , I/P‐FG:1.88KVac , O/P‐FG:0.5KVac
Isolation Resistance I/P‐O/P,I/P‐FG,O/P‐FG:100M ohms / 500Vdc at 25°C
EMI Conduction & Radiation Compliance to EN55015,FCC part 15
Harmonic Current Compliance to EN61000‐3‐2 Class C(≧75% load),EN61000‐3‐3
EMS Immunity Compliance to EN61000‐4‐2,3,4,5,6,8,11;EN61547,criteria B
Others MTBF 120K hours min.    MIL‐HDBK‐217F(25°C)
Dimension(L x W x H) 300 x 98 x 38.5 mm;    1270g/pcs
Note 1. All specifications not specially mentioned are measured at 230Vac and 25°C ambient temperature.
2. Ripple & Noise are measured at 20MHz bandwidth by using a 12" twisted pair‐wire terminated with 0.1uf & 47uf parallel capacitor.
3. Voltage Tolerance: includes line regulation, load regulation and set‐up tolerance.
4. THD < 25% at 264Vac, full load.

Conseils et Préconisations Conversion d'énergie
Demarche commerciale
Expertise
Veille et Suivi
Sur Mesure

23 autres produits dans la même catégorie

Close