|
SP1-CX |
MSP1-CX |
| Main Spec |
| Accuracy |
≤1.0 % (syringe ≥1 mL) |
| Precision |
CV≤0.05% at full stroke (with syringe ≥ 500uL) |
CV≤0.05% at full stroke (with syringe ≥1mL ) |
| Wetted material |
Borosilicate glass, PTFE, PFA, CTFE, ETFE, UHMW-PE，Ceramic |
| Dimension(L×W×H) |
114mm x 65mm x 254mm |
110mm x 44.4mm x127mm |
| Weight |
2.15 kg |
1.0 kg |
| Power supply |
DC 24V, 1.5A (peak) |
| Syringe and Drive |
| Syringe fitting |
1/4″-28 thread |
| Syringe |
50uL, 100uL, 250uL, 500uL, 1mL, 2.5mL, 5mL, 10mL, 25mL |
50uL, 100uL, 250uL, 500uL, 1mL, 2.5mL, 5mL |
| Syringe material |
Borosilicate glass, stainless steel plunger with PTFE coating, PTFE or UHMW-PE plunger tip |
| Resolution (standard mode) |
6000 steps with 0.01mm in 1 step |
3000 steps with 0.01mm in 1 step |
| Resolution (microstep mode) |
48000 microsteps with 1.25um in 1 microstep |
48000 microsteps with 0.625um in 1 microstep |
| Travel |
60mm |
30mm |
| Time for full stroke |
1.26s-1200s |
| Drive system |
Ball screw drive with optical encoder |
| Valve & Valve Drive |
| Turn Time |
≤250ms between adjacent ports |
| Valve options |
3-port Y valve, 3-port distribution valve, 4-port valve, 6-port distribution valve, 9-port distribution valve, T valve, straight-through valve or distribution valve. |
| Max pressure |
0.68MPA |
| Fitting |
1/4″-28 thread |
| Communication |
| Interface |
RS485, RS232, CAN bus, external control input and output |
| Protocol |
Data terminal, OEM protocol (serial) or CAN |
| Baud rate |
RS485 or RS232: 9600bps or 38400bps CAN bus: 100 KB, 125 KB 250 KB, 500 KB or 1MB |
| Format |
Data bit: 8; parity: none; stop bit: 1; half duplex (RS232/485) |
| Firmware |
| Topology group |
Up to 15 pumps in one group, support group control and individually addressed |
| Upgrade firmware online |
"One Click" by customer through PC Utility |
| Homing Algorithm |
Plunger home position is identified by motor stall, which will reduce the dead volume of the system |
| Halt function |
For better interactive control, "h" command is used to halt execution of the command string during plunger movement. To resume execution with "R" or "r" command |
| Microstep mode |
Set microstep mode for smoother motion with 48000 microsteps per stroke, 1/8 microstepping or 1/16 microstepping |
| Programmable parameter |
Programmable ramps, cut-off velocity, plunger speeds, backlash compensation, programmable
work-flow command set , delays and loops, terminate moves, diagnostics, absolute and relative positions |
| Environmental |
| Operating temperature |
Recommended: 15℃-40℃ , use low temperature syringe for low temperature application |
| Operating Humidity |
＜80% RH, no condensation |
| Storage temperature |
-20℃-65℃ |
| Storage Humidity |
＜80% RH, no condensation |
