Description
Equipement conçu pour faire connecter des câbles ensemble ou de relier un câble à un autre composant ou équipement.
Caractéristiques :
- Entrée de câble serti
- Manchons coniques
Schémas :
| HUBER+SUHNER type |
Item no. |
Documentation |
Groupe de câbles (exemples) |
Packaging |
Instruction de montage |
Crimp insert |
Fig. |
| 11_H4-50-3-3/133_NE |
22541737 |
Data
|
U7 (RG_58_C/U,
ENVIROFLEX_B58) |
Simple |
3078 |
B |
1 |
| 11_H4-50-4-4/133_NE |
22543809 |
Data
|
Ul6 (RG_59_B/U,
RADOX_R_F5 9) |
C |
2 |
Spécifications :
| Electrical data |
Requirements |
| Impedance |
50Ω |
| requency range |
DC to 300MHz |
| Dielectric withstanding voltage (at sea level) |
5.0 kV rms, 50 Hz (depending on cable) |
| Working voltage (at sea level) |
1.6 kV rms, 50 Hz (depending on coble) |
| Insulation resistance |
≥ 5GΩ |
Contact resistance
•Centre contact
• Outer contact |
≤ 2 mΩ
≤ 1 mΩ |
| Corona extinction voltage (at 21 000 m) |
≥ 300 V ms, 50 Hz (depending on cable) |
| Current rating, continuous |
≤ 10 A |
| Mechanical data |
Requirements |
| Coupling nut torque |
7 to 28 Ncm/0.6 to 2.5 in lbs |
| Coupling nut retention force |
≥ 450 N /101.2 lbs |
| Contact captivation |
≥ 15 N /6.l lbs |
| Coble retention force 11 |
see pages 32 - 41 |
| Durability (matings) |
≥ 500 |
| Environmental data |
Test conditions |
| Temperature range |
-65 to+ 165 °C/-85 to +329 ° F |
| Climatic category |
IEC → 55/155/21 |
| Thermal shock |
MIL-STD-202, method 107, condition B |
| Moisture resistance |
MIL-STD-202, method 106 |
| Corrosion |
saltspray test acc. to Ml L-STD-202, method 101, condition B |
| Vibration |
MIL-STD-202, method 204, condition B |
| Material data |
| Connector parts |
Material |
Plating |
| Bodies |
brass |
SU CO PLATE® |
| Pin contacts |
brass |
gold |
| Socket contacts |
copper-beryllium alloy |
gold |
| Crimp ferrules |
copper |
SU CO PLATE® |
| Insulators |
PTFE or PFA |
|
Les valeurs de performance sont typiques de l'interface du connecteur.
Les performances des composants individuels ou des connecteurs peuvent varier en fonction de la conception du connecteur, de la fixation [par exemple, câble, PCB] ou de l'application.
