CFast D150Q | INNODISK

The Innodisk CFast D150Q storage card is designed to work in harsh environments and to reduce operation system booting time. With a 7+17pin connector design, it consumes less power than a traditional HDD. It is also compliant with the CFast 1.0 standard and ATA protocol. The Innodisk CFast D150Q requires no additional drives and can be configured as a boot device or data storage device.

Features :

• S.M.A.R.T / iSMART disk health monitoring tool
• Intelligent error recovery system
• Excellent data transfer speed
• Write protection security
• Static wear-leveling algorithm
• Built-in thermal sensor

Benefits :
The Innodisk CFast D150Q provides manufacturers with an effective hard disk drive (HDD) replacement.

• Performs better than a CF Card
• Supports SATA II and SATA I

Specifications :

• Model Name : CFast D150Q
• Interface : SATA II 3.0Gb/s
• Type : Standard
• Flash Type : SLC
• Connector : 7pin+17pin
• Capacity : 2~32GB
• Max. Channels : 4
• Sequential R/W (MB/sec, max.) : 130/119
• Max. Power consumption : 0.76W (3.3V x 230mA)
• Thermal Sensor : Y
• H/W Write Protect : N
• Dimension (WxLxH/mm) : 42.8 x 36.4 x3.6
• Vibration : 20G@7~2000Hz
• Shock : 1500G@0.5ms
• MTBF : >3 million hours
• Storage Temperature : -55°C ~ +95°C
• Operation Temperature :
  - Standard Grade: 0°C ~ +70°C
  - Industrial Grade. OP: -40°C ~ +85°C