IB112 (i.MX536) : RISC, 3.5" Disk-Size SBC, 102mm x 147mm (4" x 5.8") | IBASE

• Freescale ARM Cortex-A8, 800MHz industrial-grade processor
• 1GB DDR3 memory on board
• Supports USB-OTG
• Supports SD Card/ MicroSD Card
• Rich I/O for high expansion capability
• Watchdog timer, Digital I/O

Specification :

• Form Factor :3.5" Disk-Size SBC, 102mm x 147mm (4" x 5.8")
• MPU Type Operating Frequency : Freescale Industrial Grade i.MX536 : 1GHz Cortex™-A8, 65nm, LP/GP, 19x19 0.8mm (TE-BGA)
• System Memory : 1GB DDR3-800 on board
• Data Memory :
  - Optional 8GB/16 GB eMMC
  - MicroSD slot supports up to 32GB
• Display : Sil9022A HDMI transmitter / LVDS
• Video codec :
  - Decode : 1080p, 30fps
  - Encode : 720p, 30fps
• LAN :
  - 1st  LAN : 10/100 Based-T Ethernet}
  - 2nd  LAN : 10/100 Based-T Ethernet (IB112S)
• USB : USB 4x Host via USB HUB
• Touch Controller : Via DA9053 (Resistive Touch Controller)
• Audio : Pin Header for Speaker
• Watchdog : By Hardware
• Edge I/O :
  - 1x 1st 10/100 LAN / 1x 2nd 10/100 LAN (IB112S)
  - 1x USB (USB Host. A-Type) / USB OTG x1 (mini USB B-Type) 
  Default : Device mode
  - 1x COM2 RS-232
  - 1x SD / 1x MicroSD
  - 1x 12~30V DC-in jack
  - 1x Boot switch (Boot sequence - eMMC/MicroSD)
  - 1x HDMI Type A connector
• Headers & Expansion Slots :
  Headers :
  - 8x GPIO ( IB112F, IB112S)
  - COM (RS232) x 2 (COM1 / COM3 debug port)
  - Audio pin header (1x MIC, 1x speaker)
  - 2x USB 2.0 (2mm pitch)
  - FPC connector for 4-wire Resistive Touch x1
  - 2x CAN (Pin header in IB112S, IB112T)
  - 1x 18 bit LVDS connector
  • 1x VGA pin header (in IB112F, IB112S)
  Slots :
  - 1x SATA connector
  - 1x Full Size Mini PCIe(x1) socket (USB I/F only)
• Power : 12~30V DC-in
• Operating Temperature : -20°C~ 70°C (-4°F ~ 158°F)
• Communication Devices : WiFi / GPRS / 3G Module (Optional)
• Software Support : Ubuntu Linux 10.04 (kernel 2.6.35)/ Android 2.3/ Windows CE7